Prestalever™ II Bicycle Tire Lever – Pink (single)

Patent-Pending Rim hook design prevents slipage.
Engages the Rim, not the spokes.
Use as many levers as you need BEFORE tehnsioning the tire bead.

The PrestleverTM is fabricated from slippery Nylon, greatly reducing the force needed to take away tires. When you are done, twist the Prestalever 90 degrees to lift the rim hook out of the rim. Our box-section design permits the twist-action to simply stop at 90 degrees so the lever slides out easily. The similar rim hook is used to put in tires. Start the bead by hand, then insert the Prestalever rim hook on the point where you get tension. The curved best of the Prestalever head might be on the out of doors of the tire. Flow the Prestalever along the rim and the rim hook will lift the bead within. The tire holds the Prestalever rim hook within the rim as you install. Certain tires have delicate beads. The Prestalever may also be used as a “third-hand” tool. Whilst you hand-install the bead in one direction, the tire starts lifting-out on the other end. Insert the lever at one end to carry the bead, then use BOTH hands to put in the tire from the opposite end. The Prestalever could also be the number one tool for doing away with difficult tires. Insert a lever, but do NOT flip it yet. The rim hook will Hold the lever in place, but unlike traditional levers that hook onto spokes, the bead will NOT be tensioned. You’ll still fit-in additional Prestalevers. Insert the levers spaced about 6 inches apart, then flip all of them … one-at-a-time. Even the hardest tires will come right off the rim in seconds.
Patent-Pending Rim hook design prevents slipage.
Engages the Rim, now not the spokes.
Use as many levers as you want BEFORE tehnsioning the tire bead.
Third-Hand tool for more uncomplicated tire installation.