Mobile Trailer w/ 30′ Telescoping Mast – Enclosed Trailer for Generators/Equipment – Fold Over Tower. Made in america The WCDE-4G mobile tower from Larson Electronics is a towable package with an enclosed trailer. Equipped with a 30` telescoping mast, operators can equip lighting fixtures, camera, and other equipment to the mast for elevated use. The WCDE-4G mobile tower is a towable tower package equipped with a telescoping mast and enclosure mounted to a single axle trailer. This mobile package is perfect for emergency services and products, large scale event illumination, construction, mining, industrial operations and anyplace an extended operation capable mobile lighting fixtures solution is wanted. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Telescoping Boom: The telescoping boom is composed of 3 sections extending as much as 30 feet through the usage of two manual self braking winches and permits for rotating the lighting fixtures 360 degrees. One winch is mounted to the trailer tongue and acts to lift the tower into a vertical position whilst the opposite is mounted to the boom and is used to increase the tower to the required height. The telescoping boom is constructed of galvanized steel to withstand rusting and corrosion and is able to withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed. The stabilizing outriggers are a 3 point design with one positioned under the trailer tongue and two at the rear sides of the unit. The 2 rear outriggers are adjustable and come with 1,000 lbs swivel jacks for leveling and stabilizing the tower. Housing: The entire operating components are housed inside a protective compartment constructed of 14 gauge steel and designed to supply airflow for cooling. Side doors provide get right of entry to to the internal whilst latches provide protected closing whilst the unit is in use.