1. Sensor and receiver distance£º
Not exceeded more than 60cm, then the distance between the transmitter and magnet no more than 3mm
2. The battery can last as long as 200 hours, then if you want to change the battery remember to record the entire data because it’ll be reseated after you replaced the battery.
3.Water resistant, but keep away from it exposed longer to the rain and water as it is going to absorb through. In case the device is not going to working very well as a result of water, put off the battery and let it dry.
4. It may be easily mounted on any direction, horizontal or vertical, suitable for Bike, Mountain Bike, Motor bike the essential is the wireless ranged, make sure It is in accurate distance. Then install it only at the front wheel.
5. It is at all times compatible to all bike which has an ordinary size of wheels, circumference range is 0mm~9999mm, easy to calibrate with the manual.
6. With 1 years product warranty, just contact our customer service when you have any problem with the device. ?
1. SPD Current Speed?
2. ODO Odometer(Total Odometer of Riding)?
3. DST Single Commute Distance?
4. MAX Maximum Speed?
5. AVS Average Speed?
6. TM Total Commute Time (including the break time)?
7. CLK Clock (12H/24H)?
8. Auto Scan (DST, MXS, AVS and TM will indicated)?
9. Speed Comparator (“+””-” to indicate the higher or lower speed than average)?
10. Setting Tire Circumference ((0mm~9999mm)?
11.Setting Speed Scale(km/h,m/h)?
12.Freeze Frame Memory?
12.Setting the Last Value of Odometer?
Power Source: CR2032 Battery?
Dimensions: 11.5 x 7x 4cm?
Package Weight: 76g?
1 x Magnet?
1 x Battery?
1 x Sensor?
4 x Cable Tie?
1 x User Manual
Anti Signal Interference: It may not interfere other wireless & electronics devices, wireless ranged not up to 60 cm, accurate data result.
Multi Function: Speed comparing, Average, Maximum, Relative, Riding time, Riding distance, Measurements, Auto ON/Off, Scanning, Comfortable and User friendly.
Auto Sleep/Wake: Auto standby within 300 seconds throughout inactive use, CLK Data will stay, it’ll start up if any button is press and detect any movement.
Auto Detect: There’s a small ball inside so we can create movement to awake & Auto Start-up, you’ll be able to hear it while you shake the device, but it¡®s normal.
Smooth Operation: Two buttons only for more than one modes, M/H or KM/H modes may also be make a choice, convenient and easy to make use of.