Industry Nine Trail Carbon 24H 29in Wheelset

Material: [rim] carbon fiber, [spokes and hubs] aluminum
Rim Width: [inner] 21 mm, [outer] 29 mm
Front Hub: Industry Nine Torch

Industry Nine manufacturers two Trail Carbon 29in Wheelsets, one with 32 spokes and one with 24 spokes. In the event you charge aggressive lines, or you are a bit of a bruiser, go for the 32 hole. Then again, if you are light for your feet and pick out quintessential XC lines, then I9’s 2:1-laced 24H Trail Carbon provides you with 29-inches of fast spinning, lightweight bliss. This wheelset shares all the advancements of the Trail line, including the redesigned Torch hubs. The massive news, Then again, is that carbon is in spite of everything joining I9’s aluminum disco. These are not just any run-of-the-mill epoxy and fiber-reinforced rings. As an alternative, Industry 9 enlisted assist from the composite wizards at Reynolds Cycling. Because of this these 29mm-wide outer, and 21mm inner, tubeless rims have Reynolds’ encompassing MR5 technology. It makes a speciality of five key elements — spoke face, nipple bed, tire channel, rim sidewall, and hook bead — to be able to optimize resin chemistry and carbon layup for the structural and plenty of each and every component. Long story short, this technology mated to I9’s deft spoke and hub interface is a force to be reckoned with. As an alternative of steel spokes, I9’s wheels use 7075 aluminum. The spokes are straight pull, and they have got more or less a 25% greater cross section then comparable 14/15 double butted steel spokes. In other words, these spokes have a stronger tensile strength. Also, on traditional spokes, threads are rolled, not cut. This adds to strength, but creates a stress riser where the thread channel is narrower than the diameter of spoke itself. Industry Nine, Then again, doesn’t want to roll its threads. As an alternative, they are created all over the machining process, but cut in order that the thread channel is equal to the spokes diameter. The threads themselves are in reality larger than the spoke for a strong interface with the hub. That brings to light every other defining feature of these wheels — there are no nipples. The spokes thread in an instant into hub, making nipples as useful on I9 whee…
Subject matter: [rim] carbon fiber, [spokes and hubs] aluminum
Rim Width: [inner] 21 mm, [outer] 29 mm
Front Hub: Industry Nine Torch
Front Hub Type: 15mm QR
Rear Hub: Industry Nine Torch

Brand

ItemDimensions

Label

Manufacturer

Model

NumberOfItems

PackageQuantity

ProductGroup

Publisher

Studio