Pedal lend a hand is a method that gives power when you’re pedaling. With a PAS, the controller of your electric bicycle will routinely detect your speed when you’re pedaling. Then it sends a signal to the motor to beef up you. In the event you frequently ride traditional motorbike, the pedal lend a hand mode has a more intuitive feeling than throttle mode. What’ more, it increases the battery mileage by 30%-50%. For instance, if your battery may just at the start beef up 35 km running distance, with PAS, now it may well achieve 50 km.
This type of DH-sensor has 12 magnets within the disc. It’s more precise than SH-sensor with 5 magnets on account of its larger sensing vary. DH-sensor is two-three times more sensitive than SH-sensor and has no error action. It must be fixed right of the center axle. The gap between magnet disc and sensor must be lower than 4 mm. This 12 magnets pedal assistant disc is manufactured from PC shell. It’s top intensities and antioxidant. Also, the hall electrical life is more than 20 million times. So you’ll use this sensor for a very long time.
· Rated Voltage: 4.5-6V (DC)
· Current with out brake: <5mA
· Current with brake: <6mA
· Lead tension: >20 N
· Corresponding time when brake: <0.001 s
· Corresponding distance: 2-3 mm
· Hall electrical life: >20M times
BUY NOW for enjoyable cycling and awesome DIY!
12 magnets electric bicycle Pedal Assistant Sensor; more sensitive, larger sensing vary, stable signal; energy saving
Wire length: 25-80 cm; disc diameter: 7.9 cm; disc ring diameter: 2.5cm; 5mm magnet; sensor inner ring diameter: 3.48 cm; outer ring diameter: 4.5 cm
Rated voltage: 4.5-6V (DC); PC shell, antioxidant and aging resistant
The corresponding distance between the sensor and magnetic disc: 2 to 3 mm
Effectively extend The gap mileage and battery life